+86-173-5281-1580
+86-183 1234 0501
info@speedapcb.com
Language
PCB Instant Quote
PCB Service & Product
Lead Free HASL PCB
Lead Free HASL PCB
Lead Free HASL PCB
Lead Free HASL PCB
Lead Free HASL PCB
Lead Free HASL PCB
Lead Free HASL PCB

Lead Free HASL PCB / Immersion Tin PCB

Lead-free HASL is to coat a layer of tin-lead alloy on the copper surface to prevent the oxidation of the copper surface and provide a good welding base for the subsequent assembly process. What is hot air leveling? It is actually a process of combining dip soldering and hot air leveling, and coating eutectic solder in the metalized holes of lead-free printed circuit boards and printed wires. The process is to first dip the lead-free printed circuit board with flux, then dip the molten solder, and finally pass between the two air knives. Use the hot compressed air in the air knife to remove the excess on the printed board The solder is blown off, and at the same time, the excess solder in the metal holes is eliminated, thereby obtaining a bright, smooth, and uniform solder coating.

Have a question or request?
Click below, we’ll be happy to assist.
Contact us

Features of Lead Free HASL PCB

Lead Free HASL PCB

The immersion tin process can form a flat copper-tin intermetallic compound. This feature makes the immersion tin have the same good solderability as hot air leveling without the troublesome flatness problems of hot air leveling; nor does it have electroless nickel plating / Diffusion issues between gold and metal; just the tin immersion board cannot be stored for too long.

Lead Free HASL PCB

Immersion tin does not bring any new elements into the solder joint, which is especially suitable for communication backplanes. The use of the immersion tin board is restricted due to the inconvenience of storage and the carcinogens contained in the process. About 5% -10% of PCBs currently use a dip tin process.

Parameters of Lead Free HASL PCB

1. Prevent oxidation of bare copper surface; 2. Maintain solderability


SPEEDAPCB has a mature HASL production line, as well as particularly experienced engineers, we will do our best to provide you with the perfect plate making service.


Board nameUSB transfer board
Layers of number4
Thickness of board1.6mm
Surface treatmentHASL
Min Line width /line spacing6/6mil


Board namePower signal acquisition board
Layers of number6
Thickness of board1.6mm
Surface treatmentHASL
Min Line width /line spacing5/5mil


Board nameHigh power board
Layers of number2
Thickness of board2.0mm
Surface treatmentHASL
Min Line width /line spacing15/15mil


Board nameData storage board
Layers of number6
Thickness of board1.6mm
Surface treatmentHASL
Min Line width /line spacing4/4 mil


Board nameSignal sampling backplane
Layers of number6
Thickness of board2.0mm
Surface treatmentHASL
Min Line width /line spacing4/4 mil


Board name2.4G Microwave antenna sink silver board
Layers of number6
Thickness of board1.6mm
Surface treatmentHASL
Min Line width /line spacing5/5 mil



Board nameHD image processor board
Layers of number12
Thickness of board1.6mm
Surface treatmentGold finger + Tin Spray + Hot Air Leveling
4/45/5 mil



Characteristics of Lead Free HASL PCB

  • The most prominent advantage of solder coating with hot air leveling is that the coating composition always remains the same, and the edges of the printed circuit can be completely protected.


  • The cost of hot air leveling is lower than other surface treatments, the process is mature, and the weldability is good.


Advantages and Disadvantages of Lead Free HASL PCB

Advantages 

-Tin-lead solder is not used.

-Excellent weldability.

-Lower price.

-Allows large processing Windows


Disadvantages 

-Not suitable for smaller components.

-High processing temperature.

-The difference of thickness between big bonding pad and small bonding pad.


Difference between Lead Free HASL PCB and HASL PCB 

1.From the surface, lead free hasl pcb is duller, but hasl pcb is brighter. The lead free hasl pcb wettability is a little worse than hasl pcb.

2.Lead in hasl pcb is harmful to human body, and lead free hasl pcb is not.

3.The lead content of lead free hasl pcb does not exceed 0.5. Hasl pcb can reach 37.

4.Hasl pcb will improve the activity of the tin wire in the welding process. Leaded tin wire is relatively better than lead free hasl pcb.


Performance Difference of HASL PCB and Lead Free HASL PCB

If the melting point of lead is about 183 degrees, then the temperature of the tin spraying furnace needs to be controlled at 245 degrees to 260 degrees, and the over-peak temperature needs to be controlled at 250 degrees, and the reflow temperature at 245 to 255 degrees. The lead-free melting point of about 218 degrees, then the spray tin furnace temperature needs to be controlled at 280 degrees to 300 degrees, over the peak temperature needs to be controlled at 260 degrees, reflow temperature at 260 to 270 degrees. Lead will increase the activity of tin in the soldering process. Leaded tin wire, in contrast to the case of lead-free tin wire to use, and lead-free spray tin than lead spray tin melting point is high, the welding point will be much stronger.


Inquiry Form
Relevant Customized Case Recommendation
Production flow chart
PCB FAQ
Q: What about OEM and ODM? and what is the MOQ?
A: We accept both OEM and ODM orders..MOQ is 1 pcs.
Q: Delivery terms and time?
A: We will ship the goods by DHL, TNT, Fedex, UPS or Aramex.the order can be sent out within 7-30 days depend on your order quantity, customization.
Q: What are needed for quotation?
A: PCB: Quantity, Gerber file and Technic requirements(material,surface finish treatment, copper thickness,board thickness ,...)PCBA Service: PCB information, BOM, (Testing documents...)
Sales office: 4F,Wangdefu International Building, Wanjiali Road, Furong District, Changsha City, Hunan Province
info@speedapcb.com
+86-183 1234 0501